National Intitute of Technology Hamirpur(HP)

Mechanical Engineering

The Department of Mechanical Engineering came into its existence right from the inception of the then Regional Engineering College Hamirpur (now National Institute of Technology Hamirpur) in the year 1986 and served as catering department to other disciplines. The discipline of Mechanical Engineering started offering undergraduate programme leading to four year Bachelor of Technology (B.Tech) degree in Mechanical Engineering in the year 1994. The first batch was started with an intake of 30 students which has now been enhanced to 60 students by the Ministry of HRD, Government of India from the session 2006-2007 which has further been enhanced to 90 students. Since its existence, 21 Batches of Undergraduate students with B.Tech Degree in Mechanical Engineering, 14 batches of Postgraduate programme i.e. M.Tech. (Thermal Engineering) and 7 batches of M.Tech. (CAD CAM Engineering) have passed. Apart from this about 20 students have got their PhD in various areas of specialisation i.e. Thermal, Production, Materials and Design. The department has a separate building housing the various laboratories viz : Strength of Materials, Theory of Machines, Dynamics of Machinery, Mechanical Measurements and Control, Heat Transfer, Refrigeration & Air Conditioning, Turbo Machines, Production, CAD/CAM, Metrology & Heat Engines, lecture rooms, seminar room, faculty chambers and office. The major advanced equipments available in these labs are: Computerized two stroke petrol engine test rig, Gas analyzer, Vibration exciter, Dynamometer, Four ball tester (computerized), Sound level meter, Hardness tester (Rockwell & Brinell), Impact tester, Sophisticated metrology equipment, FFT analyzer machine condition monitoring equipment, Journal bearing test rig, Refrigeration tutor, Air conditioning tutor, Ice plant tutor, Various hydraulic turbines (Kaplan, Francis, Pelton wheel) and pumps, Centrifugal blower & Heat transfer equipments, Universal Testing Machine (Computerized), Plasma cutting machine, Pollution checking equipments, Projection manometer, Flaw detector, Computerized vertical machining centre, Robot etc.

The computer lab of the department is well equipped having PCs of P III and P IV configuration, Printers, scanner facilities and engineering softwares like - NISA FINITE ELEMENT, FLUENT, FLOW LAB and ANSYS ADVANCED MULTIPHYSICS for the use of students and the faculty as well for academic and research purposes. More softwares for CAD/CAM are being procured. The department has started a Postgraduate programme leading to M. Tech. Degree with specialization in Computational Methods and Experimental Techniques in Fluid Flow & Heat transfer, admitting students from the session 2005-2006 and offering a Ph.D programme in the areas of Design, Thermal, Production/Industrial. Research scholars have registered and are pursuing their Ph.D work. The department has also submitted proposals to start new PG programmes on CAD/CAM and MBA (Industrial Management). The department has seventeen faculty members fourteen of which hold Ph.D degrees. Rest of our faculty members possess M. Tech. Degrees and are pursuing their Ph.D. degrees. The faculty members are experienced having expertise in Design/Thermal/Industrial/Production and are engaged in research work in the areas of Solar Energy, Heat Transfer, Material Science, Quality and Reliability, Air pollution control, Tribology and Mechanism Design etc apart from teaching. The faculty members have got projects on MODROBS, TAT and R&D from various funding agencies like MHRD, DST, AICTE and TEQIP. A few more projects proposals have recently been submitted for consideration to these agencies. Our graduates are well placed through on-campus and off-campus placement and are holding responsible positions in different organizations viz. ITC, Godrej Consumers, Hero Motocorp., Maruti, Saint Gobain, Future First, Infosys, Wipro, DRDO, ISRO to name a few. Department of Mechanical Engineering is alive to the needs of coming times. Accordingly more facilities and expertise are being developed in the areas of Energy, Materials, Reliability, Robotics, CFD, CAD/CAM etc.

Vision & Mission

Vision

To build a vibrant multicultural learning environment founded on value based academic principles, where in all involved shall contribute effectively, efficiently and responsibly to the nation and global community.

Mission

To achieve academic excellence in engineering, technology, architecture and science by imparting quality and value based education. To inspire our students to become responsible citizens and competent professionals with high ethical values. To meet the expectations of technical human resource at national and international level.

Faculty

Name	Designation	Phone No. (01972)	Email	Complete Profile
Dr. Vinod Yadava	Professor	254001 (O)	director@nith.ac.in	View Profile
Dr. Rakesh Sehgal	Professor (Presently Director,NIT Srinagar)	254722 (O) 254723 (R)	rsehgal@nith.ac.in	View Profile
Dr. Sunand Kumar	Professor	254724 (O) 254730 (R)	sunand@nith.ac.in	View Profile
Dr. Anoop Kumar	Professor	254726 (O) 254727 (R)	anoop@nith.ac.in	View Profile
Dr. Rajesh Sharma	Associate Professor	254730 (O) 254731 (R)	rajesh@nith.ac.in	View Profile
Dr. Rajiv Kumar Sharma	Associate Professor	254738 (O) 254739 (R)	rksfme@nith.ac.in	View Profile
Dr. Somesh Sharma	Associate Professor	254732 (O) 254733 (R)	somesh@nith.ac.in	View Profile
Dr. Sant Ram Chauhan	Associate Professor	254734 (O) 254735 (R)	srchauhan@nith.ac.in	View Profile
Dr. Prashant Kumar Dhiman	Associate Professor	254736 (O) 254737 (R)	prashant@nith.ac.in	View Profile
Dr. Siddharth	Assistant Professor	254744 (O)	sidmech@nith.ac.in	View Profile
Dr. Varun Goel	Assistant Professor	254742 (O) 254923 (R)	varun@nith.ac.in	View Profile
Dr. Debasish Das	Assistant Professor	254752 (O)	debasish@nith.ac.in	View Profile
Dr. Mohit Pant	Assistant Professor	254754 (O)	mohitfme@nith.ac.in	View Profile
Dr. Santosh B. Bopche	Assistant Professor	254740 (O)	santoshbopche@nith.ac.in	View Profile
Dr. Deepak Sharma	Assistant Professor	254702 (O)	dsharma@nith.ac.in	View Profile
Dr. Param Singh	Assistant Professor	254702 (O)	psingh@nith.ac.in	View Profile
Dr. Manoj Kumar Sinha	Assistant Professor	254702 (O)	mksinha@nith.ac.in	View Profile
Dr. Ajoy Debbarma	Assistant Professor	254702 (O)	adebbarma@nith.ac.in	View Profile
Dr. Santhosh Kumar Gugulothu	Assistant Professor	254702 (O)	santoshgk1988@nith.ac.in	View Profile
Dr. Akhilesh Kumar Chaudhary	Assistant Professor	254702 (O)		View Profile
Dr. Dilshad Ahmad Khan	Assistant Professor	254702 (O)	dilshad@nith.ac.in	View Profile
Dr. Vinod Yadav	Assistant Professor	254702 (O)	vyadav@nith.ac.in	View Profile

Staff

Name	Designation	Phone No. (01972)	Email
Sh. P. C. Bhardwaj	Superintendent	254702
Mr.Tilak Raj	Attendant	254702

Technical Staff

Name	Designation	Phone No. (01972)	Email
Sh. Partap Chand Dhiman	Technical Assistant	254704	partapchand@nith.ac.in
Sh. Dev Raj Thakur	Technical Assistant	254705
Sh. Rakesh Kumar	Sr. Technician	254707
Sh. Surinder Gautam	Sr. Technician	254706	skgautam@nith.ac.in

Program Offered

Bachelors of Technology

The Department of Mechanical Engineering at NIT Hamirpur is renowned for imparting state of the art undergraduate education and preparing its students for real world challenges. We attract the brightest students from the country who score very high ranks in the Joint Entrance Examination Mains (JEE-Main). Our alumni are doing extremely well in managing top companies, designing revolutionary products, and contributing to fundamental research, and the list of their achievements is too big to be listed.

The 4 year B. Tech. programme in Mechanical Engineering is offered to 90 students (every year) who are interested in advanced learning and research in any area of Mechanical Engineering. Since its inception, 21 Batches of Undergraduate students with B.Tech Degree in Mechanical Engineering, have passed.

Masters of Technology

The Department of Mechanical Engineering at NIT Hamirpur is renowned for imparting state of the art postgraduate education and preparing its students for real world challenges. We attract the brightest students from the country who score very high ranks in Graduate Aptitude Test in Engineering (GATE). Our alumni are doing extremely well in managing top companies, designing revolutionary products, and contributing to fundamental research, and the list of their achievements is too big to be listed.

The 2 year M. Tech. programme in Mechanical Engineering is offered to students who are interested in advanced learning and research in some areas of Mechanical Engineering. The department started a Postgraduate programme leading to M. Tech. Degree with specialization in: Thermal Engineering (CFD & Heat Transfer) admitting students from the session 2005-2006, another stream with specialization in CAD-CAM was started from the session 2008-09. Since its inception, 7 Batches of Postgraduate students with M.Tech Degree in either of these fields, have passed.

Area of Specialization

Thermal Engineering (CFD & HT)
CAD-CAM

Doctors of Philosophy

The doctoral programme in Mechanical Engineering offers students the possibility of doing intensive research in the areas of Design, Thermal, Manufacturing, Production/Industrial Engineering, etc. We currently have a total of 30 students(part time and full time) in this programme and it has been our constant endeavour to provide the best facilities and work environment to our research students. All full time students receive MHRD fellowship. The Department makes all possible efforts to support the travel of students to national/international conferences. Each research student is provided a cabin with his/her desktop PC and 24*7 Internet access. Research students have unrestricted access to all laboratories in the Department. Our students regularly publish in leading international conferences and reputed journals.

Proposals to start new PG programmes on Automation & Manufacturing and MBA (Environmental Management) have also been submitted which may also be offered in near future.

Syllabus

Bachelors of Technology

New Scheme(w.e.f. 2014)

1 year	2 years	3 years	4th Year

Old Scheme(w.e.f. 2011)

1st semester	2nd Semester	3rd Semester	4th Semester	5th Semester	6th Semester	7th Semester	8th Semester

Old Scheme

1st semester	2nd Semester	3rd Semester	4th Semester	5th Semester	6th Semester	7th Semester	8th Semester

Masters of Technology

Area of Specialization
Thermal Engineering (CFD & HT)	CAD-CAM

Labs

The Mechanical Engineering department is well equipped with various laboratories for training of UG/PG students. The facilities offered are in the fields of -

Theory of Machine
Ref. & Air Conditioning
Production
Computer Aided Manufacturing
Metallurgy & Metallography
I.C. Engine
Turbo Machine & Thermal
Heat Transfer
Mechanics of Solid
Measurement & Control
Fluid MEchanics
Heat Treatment
Machining Science

LIST OF MAJOR EXPERIMENTS

THEORY OF MACHINE (NO. OF EXPERIMENTS-11) :

To determine experimentally displacement, velocity and acceleration of Slider Crank Mechanism and draw the graph.
To determine the Coriollis Component of Acceleration at different speeds & flow rates and to plot a graph between its theoretical & experimental values.

To study the characteristics of Porter Governor and draw the graph
Speed of Rotation V/S Sleeve Displacement &
Force V/S radius of Rotation for Simple Watt Governor.

To study the characteristics of Porter Governor and draw the graph
Speed of Rotation V/S Sleeve Displacement &
Force V/S radius of Rotation for Porter Governor.

To study the characteristics of Proell Governor and draw the graph
Speed of Rotation V/S Sleeve Displacement &
Force V/S radius of Rotation for Proell Governor.

To study the characteristics of Hartnell Governor and draw the graph
Speed of Rotation V/S Sleeve Displacement &
Force V/S radius of Rotation for Hartnell Governor.

Plotting and analysis the x - θ, v - θ, a - θ curve with the combination of cam and follower using Circular Arc Cam with Mushroom Follower.
Plotting and analysis the x - θ, v - θ, a - θ curve with the combination of cam and follower using Tangent Cam with Knife Edge Follower.
Plotting and analysis the x - θ, v - θ, a - θ curve with the combination of cam and follower using Eccentric Cam with Roller Follower.
To justify the rotation experimentally using Motorized Gyroscope between Torque (T) and precession (p) angular velocity i.e. T = I??p.
To find the counter balancing weight position in rotating mass system using Static and Dynamic Balancing Apparatus.

2.REF. & AIR CONDITIONING (NO. OF EXPERIMENTS-10): :

To find COP of vapour compression system (capacity1/3ton)with using R-12 refrigerant.
To study of domestic refrigerator and find out its capacity and COP with R-12 refrigerant.
To study of heat pump with water cooled condenser and to determine its COP.
to study of heat pump with air cooled condenser and to determine its COP.
To find out COP of computerized vapour compression system with different type of expansion valve and compare the COP values.
To study the window type air conditioner and calculate the air quality of conditioned air.
To study the vapour absorption system (aqua ammonia system) and calculate COP with using 220 AC main line.
To study the vapour absorption system (aqua ammonia system) and calculate COP with using LPG as heat source in generator.
To find COP of vapour compression system (capacity-1/2ton)with using R-22 refrigerant.
To find the cooling rate and cop of water cooler test rig.

3.PRODUCTION (NO. OF EXPERIMENTS-10):

To study of Metallurgical Microscope.
To study the characteristics of Fe-C Equilibrium Diagram.
To study the Microstructure of Given Sample.
To perform Izod Impact Test.
To perform a Tensile Test on a Given Specimen.
To perform the heat treatment operation annealing, normalizing quenching and perform Toughness Test.
To study the effect of tempering on toughness on Quenched Medium Carbon Steel.
To study the effect of tempering temperature on Toughness of Medium Carbon Steel.
To study and perform Fatigue Test.
To perform Tensile Test and determine the modules of rigidity and mini shear stress.

4.CAM LAB. (NO. OF EXPERIMENTS-05):

To study the six axis Robot and make a simple programme using with Teaching method.
Make a programme of simple step cutting on CNC Turning Centre using with single tool.
Make a programme on CNC milling machine using with single tool.
Study of CIM System.
To write a complete programme of machining part on CIM System.

5.METALLURGY & METALLOGRAPHIC LAB. (NO. OF EXPERIMENTS-10):

Study and use of linear Measuring Instruments and to perform experiments
Vernier Calipers
Micrometer
Study of roughness tester and measure the roughness of given samples.
Angle measurement by use of Sine bar and slip gauges.
To Study the Calinometer and to measure the angle of inclination of given job.
Study of different types of gauges.
Study of Vertical Profile Projector and to find the different dimensions of the given sample.
To study the metallurgical microscope and find out the microstructure of the given sample.
To study the tool room microscope and measure the micro dimension of the given sample.
Study of Horizontal Profile Projector and to measure the different dimensions of the given sample.

6.I.C.ENGINE (NO. OF EXPERIMENTS-09):

To determine the volumetric efficiency and mass flow rate of the single stage air compressor.
To conduct a load test on four stroke single cylinder vertical diesel engine test rig and to draw the heat balance sheet.
To conduct a load test on four stroke single cylinder Horizontal diesel engine test rig and to draw the heat balance sheet.
To conduct a performance test on the four stroke four cylinder petrol engine test rig and to draw the heat balance sheet.
To calculate the IHP (Morse Test) and Mechanical Efficiency of the four stroke four cylinder petrol engine test rig.
To conduct a performance test on four stroke four cylinder diesel engine test rig and to draw the heat balance sheet.
To calculate the IHP (Morse Test) and Mechanical Efficiency of the four stroke four cylinder Diesel engine test rig.
To conduct a performance Test and to draw heat balance sheet for two stroke single cylinder petrol engine test rig.
To study the horizontal fired tube boiler.

7.TURBO MACHINE & THERMAL (NO. OF EXPERIMENTS-09):

To study the characteristics of the Double Acting Reciprocating pump test rig at variable Speed.
To conduct the Cavitation test and to find the cavitation number.
To study the characteristics of the Pelton Wheel Turbine test rig at constant head and constant speed.
To study the characteristics of the Francis Wheel Turbine test Rig.
To conduct a test on Mixed Flow Pump test rig to obtain the pump characteristics.
To study the characteristics of Single stage Centrifugal pump Test rig.
To study the characteristics of Centrifugal Blower Test rig.
To study the characteristics of the Kaplan Wheel Turbine test Rig.
To study the characteristics of Multistage Centrifugal pump Test rig.

8.HEAT TRANSFER (NO. OF EXPERIMENTS-10):

Draw the temperature distribution along the length of a pin /fin in natural and forced convection and find heat transfer coefficient and verify the result.
Determine the thermal conductivity of lagging material and plot the temperature distribution across the lagged pipe.
Determine the Stephan Boltzman constant.
Determine the Thermal Conductivity of Guarded hot plate and verify the results.
Determine the Thermal Conductivity of Insulating powder and verify the results.
Determine overall heat transfer co-efficient for a tube in tube type heat exchanger for parallel flow and counter flow and find the effectiveness of the HEXPF. and HEXCF.
Determine the heat transfer co-efficient for a pipe loosing heat by forced convection to air and to plot the graph between Re and Nu. Verify the results.
Determine the heat transfer co-efficient for a vertical tube loosing heat by natural convection. And verify the results.
To calculate heat transfer rate and effectiveness of shell & tube heat exchanger in co- current mode and counter current mode.
To calculate heat transfer rate and effectiveness of double pipe heat exchanger in co-current mode and counter current mode.

9.MECHANICS OF SOLID (NO. OF EXPERIMENTS-08):

To find out the youngs modulus of elasticity of a given bar (brass) with the help of Deflection Beam Apparatus.
To find the value of youngs modulus of elasticity (E) of given wires materials by Searls apparatus.
To determine the Stiffness of Spring and compare it with the experimental value.
Study of Rockwell Hardness Testing Machine and to find out Rockwell Hardness Number (HR) of the given specimen.
To study the Impact testing machine and to perform Izod test to find the Impact strength of the given specimen.
Study of Brinell Hardness testing Machine and to find out Brinell Hardness Number (HBN) of the given specimen.
To perform torsion test and determine the modulus of rigidity and maximum shear stress for the given test piece.
Study of Universal Testing Machine (Computerized) and to perform experiments:
Tensile
Compression
Flexure
Shear.

10.MEASUREMENT & CONTROL (NO. OF EXPERIMENTS-15):

Study of Displacement Measurement Tutor (LVDT) and to perform experiment to determine percentage error.
Study of Strain Measurement Tutor and to perform experiment to determine percentage error.
Study of RPM Measurement Tutor and to perform experiment to determine percentage error.
Study of Velocity Measurement Tutor and to perform experiment to determine percentage error.
Study of Water Level Measurement Tutor and to perform experiment to determine percentage error.
Study of Temperature Measurement Tutor and to perform experiment to determine percentage error.
Study of Long Range Linear Measurement Tutor and to perform experiment to determine percentage error.
Study of Torque Measurement Tutor and to perform experiment to determine percentage error.
Study of Dead Weight Tester and to perform experiment to determine percentage error.
Study of Light Measurement Tutor and to perform experiment.
Study of CO-HC ANALYSER and to perform experiment.
Study of smoke check meter and to perform experiment.
Study of Sound Level Meter and to perform experiment.
Study of PID Temperature Controller and to perform experiment.
Study of High volume Air sampler and to perform experiment.

11.FLUID MECHANICS (NO. OF EXPERIMENTS-08):

To determine the co-efficient of discharge (cd) of orifice meter and draw characteristic curves.
To determine the co-efficient of discharge (cd) of venturi meter and draw characteristic curves.
To determine the Metacentric Height of the floating body (ship model).
To determine co-efficient of discharge (cd) of the given Notches:
Rectangular
V- notch.
To determine the co-efficient of velocity using given Pitot tube.
To find friction loss and frictional factor of given pipe lines.
To verify Bernoullis theorem.
To find out the co-efficient of impact on given vanes.

12.HEAT TREATMENT (NO. OF EXPERIMENTS-09):

To study the different type of furnances used in heat treatment.
To perform the heat treatment operation Annealing,Normalizing,Quenching and to perform toughness test & hardness test.
To study the effect of tempering on toughness of Quenched, medium carbon steel at 550 C
To perform jomney end quenched test and to check harden ability of steel.
To study the effects of mass of harden ability of steel.
To study the effect of heat treatment (Annealing,Normalizing and Quenching) on the mechanical properties (hardness, tensile strength and ductility) of high carbon steel.
To study and perform fatigue test on heat treated steel.
To study the use of microscope for examination of micro structure.
To perform wear & friction test on heat treated steel specimen.

13.MACHINING SCIENCE (NO. OF EXPERIMENTS-10):

To study the profile projector and find the dimensions of given specimen.
To study the different types of measuring instruments used in machining science
To draw and study the geometry of single point cutting tool used on lathe.
To study the geometry of multi point cutting tools.
To study the various temperature measurement techniques and to measure tool chip interface temperature.
To study the effect of cutting parameters on surface roughness in machining of steel and aluminum alloys.
To study the different types of chips produced during machining of different materials.
To study the lathe tools dynamometer and also study the effect of cutting parameters ( cutting speed, feed, depth of cut) on the cutting forces.
To study the different types of cutting fluid used in machining. 10. To study the different types of tool wear and measure the amount of tool wear under different conditions.

Consultancy

PAGE UNDER CONSTRUCTION

R&D Projects

Research & Development Work (Mechanical Engineering Department)

S. No.	Duration	Sponsor	Project Title	Principal Investigator(s)	Grant Awarded	Status
1	2 years (1995-1997)	MHRD (Govt. of India)	Design & fabrication of journal bearing test rig to study the thermal behaviour of circular journal bearing(FIP)	Dr. Rakesh Sehgal	₹ 1.40 Lakhs	Completed
2	6 months (28/03/2001-30/09/2001)	MHRD (Govt. of India)	Studies on machining characteristics of Al-Si based alloys	Er. Dheerendra Kumar Dwivedi	₹ 5 Lakhs	Completed
3	3.5 years up to (2004)	MHRD (Govt. of India)	Study of application of re-engineering in an industry	Dr. Somesh Sharma	₹ 1 Lakhs	Completed
4	2 years (2004-2006)	MHRD (Govt. of India)	Experimental Investigation of The Thermal Behaviour of Elliptical & Offset Halves Journal Bearing (TAT)	Dr. Rakesh Sehgal	₹ 10 Lakhs	Completed
5	1 year (2004-2005)	MHRD (Govt. of India)	Influence of vibration & magnesium on grain refinement	-	₹ 0.20 Lakhs	Completed
6	2 years (2005-2007)	MHRD (Govt. of India)	To investigate the technical feasibility of using air cooled solar assisted vapour absorption system	Dr. Prashant Kumar Dhiman	₹ 7 Lakhs	Completed
7	2 years (2007-2009)	UGC (Govt. of India	Analysis of reliability & maintainability aspects in process industries	Dr. Rajiv Kumar Sharma	₹ 0.75 Lakhs	Completed
8	1 year (2008)	CHE (IIM Ahmedabad)	Solar water purification system	Dr. Varun Goel	₹ 0.65 Lakhs	Completed
9	2009	Dept. of Science & Technology (Govt. of India)	Development of short fiber reinforced hybrid composites & study of their erosion characteristics	Dr. Amar Patnaik	₹ 1.80 Lakhs	Completed
10	2 years (2009-2011)	UGC (Govt. of India	Iso-viscous & thermal studies of some non-circular journal bearing profiles	Dr. Rakesh Sehgal	Salary For 2 years + 3.00 Lakhs(₹23 Lakhs )	Ongoing
11	3 years (2012-2015)	Dept. of Science & Technology (Govt. of India)	Effect Of Apex Angle On Heat Transfer & Friction Characteristics Having Roughness Element On Triangular Duct Used In Solar Air Heater	Dr. Varun Goel	₹ 6.48 Lakhs	Ongoing
12	3 years (2012-2015)	Dept. of Science & Technology (Govt. of India)	Strategic role of quality in offering competitive positioning in MSMEs	Dr. Rajiv Kumar Sharma(PI) Dr. Rajesh Sharma (Co-PI)	₹ 9.32 Lakhs	Ongoing
13	2 years (2012-2014)	Dept. of Science & Technology (Govt. of India)	Investigation on development mechanical characterization & wear performance estimation of polymer based functionally graded material for possible utilization as gears in small appliances	Dr. Siddharth	₹ 16.5 Lakhs	Ongoing
14	2 years (2015-2017)	Dept. of Science & Technology (Govt. of India)	Researching High Technology System: Scope of Functional Optimization	Dr. Somesh Sharma	₹ 12.5 Lakhs	Ongoing

Mechanical Engineering

Mechanical Engineering

Vision & Mission

Vision

Mission

Faculty

Staff

Technical Staff

Program Offered

Bachelors of Technology

Masters of Technology

Area of Specialization

Doctors of Philosophy

Syllabus

Bachelors of Technology

New Scheme(w.e.f. 2014)

Old Scheme(w.e.f. 2011)

Old Scheme

Masters of Technology

Labs

LIST OF MAJOR EXPERIMENTS THEORY OF MACHINE (NO. OF EXPERIMENTS-11) :

2.REF. & AIR CONDITIONING (NO. OF EXPERIMENTS-10): :

3.PRODUCTION (NO. OF EXPERIMENTS-10):

4.CAM LAB. (NO. OF EXPERIMENTS-05):

5.METALLURGY & METALLOGRAPHIC LAB. (NO. OF EXPERIMENTS-10):

6.I.C.ENGINE (NO. OF EXPERIMENTS-09):

7.TURBO MACHINE & THERMAL (NO. OF EXPERIMENTS-09):

8.HEAT TRANSFER (NO. OF EXPERIMENTS-10):

9.MECHANICS OF SOLID (NO. OF EXPERIMENTS-08):

10.MEASUREMENT & CONTROL (NO. OF EXPERIMENTS-15):

11.FLUID MECHANICS (NO. OF EXPERIMENTS-08):

12.HEAT TREATMENT (NO. OF EXPERIMENTS-09):

13.MACHINING SCIENCE (NO. OF EXPERIMENTS-10):

Consultancy

PAGE UNDER CONSTRUCTION

R&D Projects

Research & Development Work (Mechanical Engineering Department)

Information Brouchure

PAGE UNDER CONSTRUCTION

Contact

Dr. Sunand Kumar

Head of Department

Mechanical Engineering

National Institute of Technology Hamirpur

Himachal Pradesh, India

Phone No. (01972):254700

Email: sunand@nith.ac.in

Fax : +91-1972-223834

LIST OF MAJOR EXPERIMENTS

THEORY OF MACHINE (NO. OF EXPERIMENTS-11) :